Base
Application
Metal Sheets
Yellow Galvanised
Steel 5 to 12 mm
Specifications
- Head style 5/16” (8 mm)
- Washer diameter standard 16 mm
- Galvanised EPDM bond seal
- Thread for substructure steel 5 to 12 mm
- Drilling point 5 (hardened steel)
Options
- Powder coated in any desired RAL colour
- Washer diameter 19 or 22 mm
Certificates
Section
Order information
Product | Size (L) | Packaging | Article code |
---|---|---|---|
Self-drilling screw 5,5 x 35 - DP5 | 35 mm | 250 pcs/box | 2004055503516GV |
Mechanical properties
16 mm
19 mm
22 mm
Materials | ||
---|---|---|
Screw | Yellow Galvanised steel |
|
Bond washer | Yellow Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 12 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.5 | 2 | 3 | 4 | ≥ 6,00 | |||||
VR,k [kN] | 0.4 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | |||
0.5 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | ||||
0.55 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | ||||
0.63 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | ||||
0.75 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | ||||
0.88 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
1 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
1.13 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
1.25 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
NR,k [kN] | 0.4 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.35 | 1.35 | 1.35 | 1.35 | 1.35 | |||
0.5 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 1.83 | 1.83 | 1.83 | 1.83 | ||||
0.55 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.07 | 2.07 | 2.07 | 2.07 | ||||
0.63 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.46 | 2.46 | 2.46 | 2.46 | ||||
0.75 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 3.05 | 3.05 | 3.05 | ||||
0.88 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 3.68 | 3.68 | 3.68 | ||||
1 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 3.68 | 3.68 | 3.68 | ||||
1.13 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 3.68 | 3.68 | 3.68 | ||||
1.25 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 3.68 | 3.68 | 3.68 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | Yellow Galvanised steel |
|
Bond washer | Yellow Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 12 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.5 | 2 | 3 | 4 | ≥ 6,00 | |||||
VR,k [kN] | 0.4 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | |||
0.5 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | ||||
0.55 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | ||||
0.63 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | ||||
0.75 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | ||||
0.88 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
1 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
1.13 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
1.25 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
NR,k [kN] | 0.4 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.44 | 1.44 | 1.44 | 1.44 | 1.44 | |||
0.5 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.15 | 2.15 | 2.15 | 2.15 | ||||
0.55 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.4 | 2.4 | 2.4 | 2.4 | ||||
0.63 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 2.78 | 2.78 | 2.78 | ||||
0.75 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 3.37 | 3.37 | 3.37 | ||||
0.88 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 4.1 | 4.1 | 4.1 | ||||
1 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 4.1 | 4.1 | 4.1 | ||||
1.13 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 4.1 | 4.1 | 4.1 | ||||
1.25 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 4.1 | 4.1 | 4.1 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | Yellow Galvanised steel |
|
Bond washer | Yellow Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 12 mm |
Washer diameter
22 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.5 | 2 | 3 | 4 | ≥ 6,00 | |||||
VR,k [kN] | 0.4 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | 1.13 | |||
0.5 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | ||||
0.55 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | ||||
0.63 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | ||||
0.75 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | ||||
0.88 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
1 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
1.13 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
1.25 | 2.1 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | 3.12 | ||||
NR,k [kN] | 0.4 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | |||
0.5 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 2.67 | 2.67 | 2.67 | ||||
0.55 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 2.86 | 2.86 | 2.86 | ||||
0.63 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 3.16 | 3.16 | 3.16 | ||||
0.75 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 3.61 | 3.61 | 3.61 | ||||
0.88 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 4.38 | 4.38 | 4.38 | ||||
1 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 4.38 | 4.38 | 4.38 | ||||
1.13 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 4.38 | 4.38 | 4.38 | ||||
1.25 | 0.45 | 0.67 | 0.88 | 1.1 | 1.31 | 1.74 | 2.6 | 4.38 | 4.38 | 4.38 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | Yellow Galvanised steel |
|
Bond washer | Yellow Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 12 mm |
mm