Base
Application
Sandwich panels
Galvanised
Steel 1,5 to 5 mm
Specifications
- Head style 5/16” (8 mm)
- Washer diameter standard 19 mm
- Galvanised EPDM bond seal
- Support thread
- Thread for substructure steel 1,5 to 5 mm
- Drilling point 3
Options
- Powder coated in any desired RAL colour
- Washer diameter 16 of 22 mm
Certificates
Section
Applications
Using the table below, the correct length of the fastener can easily be determined.
Size | Minimal Insulation thickness | Article code | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
20.0 | 40.0 | 60.0 | 80.0 | 100.0 | 120.0 | 140.0 | 160.0 | 180.0 | ||
5,5/6,3 x 65 mm | 20 - 46 mm
|
1004035506516 | ||||||||
5,5/6,3 x 82 mm | 46 - 63 mm
|
1004035508216 | ||||||||
5,5/6,3 x 98 mm | 63 - 79 mm
|
1004035509816 | ||||||||
5,5/6,3 x 115 mm | 79 - 96 mm
|
1004035511516 | ||||||||
5,5/6,3 x 135 mm | 96 - 116 mm
|
1004035513516 | ||||||||
5,5/6,3 x 150 mm | 116 - 131 mm
|
1004035515016 | ||||||||
5,5/6,3 x 175 mm | 131 - 156 mm
|
1004035517516 | ||||||||
5,5/6,3 x 190 mm | 156 - 171 mm
|
1004035519016 | ||||||||
5,5/6,3 x 210 mm | 171 - 191 mm
|
1004035521016 |
Order information
Product | Size | Packaging | Article code |
---|---|---|---|
Sandwich Panel Screw 5,5/6,3 x 65 – BP3 | 65 mm | 100 pcs/box | 1004035506516 |
Sandwich Panel Screw 5,5/6,3 x 82 – BP3 | 82 mm | 100 pcs/box | 1004035508216 |
Sandwich Panel Screw 5,5/6,3 x 98 – BP3 | 98 mm | 100 pcs/box | 1004035509816 |
Sandwich Panel Screw 5,5/6,3 x 115 – BP3 | 115 mm | 100 pcs/box | 1004035511516 |
Sandwich Panel Screw 5,5/6,3 x 135 – BP3 | 135 mm | 100 pcs/box | 1004035513516 |
Sandwich Panel Screw 5,5/6,3 x 150 – BP3 | 150 mm | 100 pcs/box | 1004035515016 |
Sandwich Panel Screw 5,5/6,3 x 175 – BP3 | 175 mm | 100 pcs/box | 1004035517516 |
Sandwich Panel Screw 5,5/6,3 x 190 – BP3 | 190 mm | 100 pcs/box | 1004035519016 |
Sandwich Panel Screw 5,5/6,3 x 210 – BP3 | 210 mm | 100 pcs/box | 1004035521016 |
Mechanical properties
16 mm
19 mm
22 mm
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | ||||||
0.5 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | |||||||
0.55 | 2.53 | 2.53 | 2.53 | 2.53 | 2.53 | 2.53 | 2.53 | |||||||
0.63 | 2.64 | 2.64 | 2.64 | 2.64 | 2.64 | 2.64 | 2.64 | |||||||
0.75 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | |||||||
0.88 | 2.8 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.13 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.25 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
NR,k [kN] | 0.4 | 0.68 | 0.94 | 1.33 | 1.33 | 1.33 | 1.33 | 1.33 | ||||||
0.5 | 0.68 | 0.94 | 1.86 | 1.86 | 1.86 | 1.86 | 1.86 | |||||||
0.55 | 0.68 | 0.94 | 2.06 | 2.06 | 2.06 | 2.06 | 2.06 | |||||||
0.63 | 0.68 | 0.94 | 2.06 | 2.37 | 2.37 | 2.37 | 2.37 | |||||||
0.75 | 0.68 | 0.94 | 2.06 | 2.64 | 2.85 | 2.85 | 2.85 | |||||||
0.88 | 0.68 | 0.94 | 2.06 | 2.64 | 2.85 | 2.85 | 2.85 | |||||||
1 | 0.68 | 0.94 | 2.06 | 2.64 | 2.85 | 2.85 | 2.85 | |||||||
1.13 | 0.68 | 0.94 | 2.06 | 2.64 | 2.85 | 2.85 | 2.85 | |||||||
1.25 | 0.68 | 0.94 | 2.06 | 2.64 | 2.85 | 2.85 | 2.85 | |||||||
u [mm] | 40 | 6 | 3 | 3 | 3 | 3 | 2 | 2 | ||||||
50 | 7.5 | 3.5 | 3.5 | 3.5 | 3.5 | 2.5 | 2.5 | |||||||
60 | 9 | 4.5 | 4.5 | 4.5 | 4.5 | 3 | 3 | |||||||
80 | 12 | 6 | 6 | 6 | 6 | 4 | 4 | |||||||
100 | 15 | 7.5 | 7.5 | 7.5 | 7.5 | 5 | 5 | |||||||
120 | 18 | 9 | 9 | 9 | 9 | 6 | 6 | |||||||
≥160 | 24 | 12 | 12 | 12 | 12 | 8 | 8 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | ||||||
0.5 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | |||||||
0.55 | 2.53 | 2.53 | 2.53 | 2.53 | 2.53 | 2.53 | 2.53 | |||||||
0.63 | 2.64 | 2.64 | 2.64 | 2.64 | 2.64 | 2.64 | 2.64 | |||||||
0.75 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | |||||||
0.88 | 2.8 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.13 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.25 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
NR,k [kN] | 0.4 | 0.68 | 0.94 | 1.51 | 1.51 | 1.51 | 1.51 | 1.51 | ||||||
0.5 | 0.68 | 0.94 | 2.06 | 2.47 | 2.47 | 2.47 | 2.47 | |||||||
0.55 | 0.68 | 0.94 | 2.06 | 2.64 | 2.67 | 2.67 | 2.67 | |||||||
0.63 | 0.68 | 0.94 | 2.06 | 2.64 | 2.99 | 2.99 | 2.99 | |||||||
0.75 | 0.68 | 0.94 | 2.06 | 2.64 | 3.48 | 3.48 | 3.48 | |||||||
0.88 | 0.68 | 0.94 | 2.06 | 2.64 | 3.48 | 3.48 | 3.48 | |||||||
1 | 0.68 | 0.94 | 2.06 | 2.64 | 3.48 | 3.48 | 3.48 | |||||||
1.13 | 0.68 | 0.94 | 2.06 | 2.64 | 3.48 | 3.48 | 3.48 | |||||||
1.25 | 0.68 | 0.94 | 2.06 | 2.64 | 3.48 | 3.48 | 3.48 | |||||||
u [mm] | 40 | 6 | 3 | 3 | 3 | 3 | 2 | 2 | ||||||
50 | 7.5 | 3.5 | 3.5 | 3.5 | 3.5 | 2.5 | 2.5 | |||||||
60 | 9 | 4.5 | 4.5 | 4.5 | 4.5 | 3 | 3 | |||||||
80 | 12 | 6 | 6 | 6 | 6 | 4 | 4 | |||||||
100 | 15 | 7.5 | 7.5 | 7.5 | 7.5 | 5 | 5 | |||||||
120 | 18 | 9 | 9 | 9 | 9 | 6 | 6 | |||||||
≥160 | 24 | 12 | 12 | 12 | 12 | 8 | 8 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
22 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | ||||||
0.5 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | |||||||
0.55 | 2.53 | 2.53 | 2.53 | 2.53 | 2.53 | 2.53 | 2.53 | |||||||
0.63 | 2.64 | 2.64 | 2.64 | 2.64 | 2.64 | 2.64 | 2.64 | |||||||
0.75 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | |||||||
0.88 | 2.8 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.13 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.25 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
NR,k [kN] | 0.4 | 0.68 | 0.94 | 1.89 | 1.89 | 1.89 | 1.89 | 1.89 | ||||||
0.5 | 0.68 | 0.94 | 2.06 | 2.64 | 2.89 | 2.89 | 2.89 | |||||||
0.55 | 0.68 | 0.94 | 2.06 | 2.64 | 3.06 | 3.06 | 3.06 | |||||||
0.63 | 0.68 | 0.94 | 2.06 | 2.64 | 3.35 | 3.35 | 3.35 | |||||||
0.75 | 0.68 | 0.94 | 2.06 | 2.64 | 3.77 | 3.77 | 3.77 | |||||||
0.88 | 0.68 | 0.94 | 2.06 | 2.64 | 3.77 | 3.77 | 3.77 | |||||||
1 | 0.68 | 0.94 | 2.06 | 2.64 | 3.77 | 3.77 | 3.77 | |||||||
1.13 | 0.68 | 0.94 | 2.06 | 2.64 | 3.77 | 3.77 | 3.77 | |||||||
1.25 | 0.68 | 0.94 | 2.06 | 2.64 | 3.77 | 3.77 | 3.77 | |||||||
u [mm] | 40 | 6 | 3 | 3 | 3 | 3 | 2 | 2 | ||||||
50 | 7.5 | 3.5 | 3.5 | 3.5 | 3.5 | 2.5 | 2.5 | |||||||
60 | 9 | 4.5 | 4.5 | 4.5 | 4.5 | 3 | 3 | |||||||
80 | 12 | 6 | 6 | 6 | 6 | 4 | 4 | |||||||
100 | 15 | 7.5 | 7.5 | 7.5 | 7.5 | 5 | 5 | |||||||
120 | 18 | 9 | 9 | 9 | 9 | 6 | 6 | |||||||
≥160 | 24 | 12 | 12 | 12 | 12 | 8 | 8 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
mm