Base
Application
Metal Sheets
Bi-metal A2 304
Steel ≥ 12 mm
Specifications
- Head style 5/16” (8 mm)
- Washer diameter standard 16 mm
- SS EPDM bond seal
- Support thread
- Thread for substructure steel ≥ 12 mm
- Drilling point S15
Options
- Powder coated in any desired RAL colour
- Washer diameter 19 or 22 mm
Certificates
Section
Order information
Product | Size (L) | Packaging | Article code |
---|---|---|---|
Self-drilling screw PRO S15 5,5 x L | 50 mm | 250 pcs | 2001Q55505016 |
Mechanical properties
16 mm
19 mm
22 mm
Materials | ||
---|---|---|
Screw | SS 1.4301 (A2) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 6 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||||||
6 | 7 | 8 | 9 | 10 | 11 | ≥ 12,00 | ||||||||
VR,k [kN] | 0.4 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | ||||||
0.5 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | |||||||
0.55 | 1.74 | 1.74 | 1.74 | 1.74 | 1.74 | 1.74 | 1.74 | |||||||
0.63 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | |||||||
0.75 | 1.96 | 1.96 | 1.96 | 1.96 | 1.96 | 1.96 | 1.96 | |||||||
0.88 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
1 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
1.13 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
1.25 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
NR,k [kN] | 0.4 | 1.35 | 1.35 | 1.35 | 1.35 | 1.35 | 1.35 | 1.35 | ||||||
0.5 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | |||||||
0.55 | 2.07 | 2.07 | 2.07 | 2.07 | 2.07 | 2.07 | 2.07 | |||||||
0.63 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | 2.46 | |||||||
0.75 | 3.05 | 3.05 | 3.05 | 3.05 | 3.05 | 3.05 | 3.05 | |||||||
0.88 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | |||||||
1 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | |||||||
1.13 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | |||||||
1.25 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 | 3.68 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | SS 1.4301 (A2) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 6 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||||||
6 | 7 | 8 | 9 | 10 | 11 | ≥ 12,00 | ||||||||
VR,k [kN] | 0.4 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | ||||||
0.5 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | |||||||
0.55 | 1.74 | 1.74 | 1.74 | 1.74 | 1.74 | 1.74 | 1.74 | |||||||
0.63 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | |||||||
0.75 | 1.96 | 1.96 | 1.96 | 1.96 | 1.96 | 1.96 | 1.96 | |||||||
0.88 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
1 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
1.13 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
1.25 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
NR,k [kN] | 0.4 | 1.44 | 1.44 | 1.44 | 1.44 | 1.44 | 1.44 | 1.44 | ||||||
0.5 | 2.15 | 2.15 | 2.15 | 2.15 | 2.15 | 2.15 | 2.15 | |||||||
0.55 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | |||||||
0.63 | 2.78 | 2.78 | 2.78 | 2.78 | 2.78 | 2.78 | 2.78 | |||||||
0.75 | 3.37 | 3.37 | 3.37 | 3.37 | 3.37 | 3.37 | 3.37 | |||||||
0.88 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | |||||||
1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | |||||||
1.13 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | |||||||
1.25 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 | 4.1 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | SS 1.4301 (A2) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 6 mm |
Washer diameter
22 mm
tN1 [mm] | tII [mm] | |||||||||||||
6 | 7 | 8 | 9 | 10 | 11 | ≥ 12,00 | ||||||||
VR,k [kN] | 0.4 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | ||||||
0.5 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | 1.68 | |||||||
0.55 | 1.74 | 1.74 | 1.74 | 1.74 | 1.74 | 1.74 | 1.74 | |||||||
0.63 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | 1.83 | |||||||
0.75 | 1.96 | 1.96 | 1.96 | 1.96 | 1.96 | 1.96 | 1.96 | |||||||
0.88 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
1 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
1.13 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
1.25 | 1.96 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | 3.01 | |||||||
NR,k [kN] | 0.4 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | ||||||
0.5 | 2.67 | 2.67 | 2.67 | 2.67 | 2.67 | 2.67 | 2.67 | |||||||
0.55 | 2.86 | 2.86 | 2.86 | 2.86 | 2.86 | 2.86 | 2.86 | |||||||
0.63 | 3.16 | 3.16 | 3.16 | 3.16 | 3.16 | 3.16 | 3.16 | |||||||
0.75 | 3.61 | 3.61 | 3.61 | 3.61 | 3.61 | 3.61 | 3.61 | |||||||
0.88 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | |||||||
1 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | |||||||
1.13 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | |||||||
1.25 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 | 4.38 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | SS 1.4301 (A2) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 6 mm |
mm