Base
Section
Order information
Product | Size (L) | Packaging | Article code |
---|---|---|---|
Self-drilling screw 5,5 x 25 - DP3 | 25 mm | 250 pcs/box | 2004035502516 |
Self-drilling screw 5,5 x 38 - DP3 | 38 mm | 250 pcs/box | 2004035503816 |
Mechanical properties
16 mm
19 mm
22 mm
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | ||||||
0.5 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | |||||||
0.55 | 1.69 | 1.69 | 1.69 | 1.69 | 1.69 | 1.69 | 1.69 | |||||||
0.63 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | |||||||
0.75 | 1.99 | 1.99 | 1.99 | 1.99 | 1.99 | 1.99 | 1.99 | |||||||
0.88 | 1.99 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.13 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.25 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
NR,k [kN] | 0.4 | 0.68 | 0.94 | 1.48 | 1.48 | 1.48 | 1.48 | 1.48 | ||||||
0.5 | 0.68 | 0.94 | 1.78 | 1.78 | 1.78 | 1.78 | 1.78 | |||||||
0.55 | 0.68 | 0.94 | 2.01 | 2.01 | 2.01 | 2.01 | 2.01 | |||||||
0.63 | 0.68 | 0.94 | 2.06 | 2.39 | 2.39 | 2.39 | 2.39 | |||||||
0.75 | 0.68 | 0.94 | 2.06 | 2.64 | 2.96 | 2.96 | 2.96 | |||||||
0.88 | 0.68 | 0.94 | 2.06 | 2.64 | 2.96 | 2.96 | 2.96 | |||||||
1 | 0.68 | 0.94 | 2.06 | 2.64 | 2.96 | 2.96 | 2.96 | |||||||
1.13 | 0.68 | 0.94 | 2.06 | 2.64 | 2.96 | 2.96 | 2.96 | |||||||
1.25 | 0.68 | 0.94 | 2.06 | 2.64 | 2.96 | 2.96 | 2.96 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | ||||||
0.5 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | |||||||
0.55 | 1.69 | 1.69 | 1.69 | 1.69 | 1.69 | 1.69 | 1.69 | |||||||
0.63 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | |||||||
0.75 | 1.99 | 1.99 | 1.99 | 1.99 | 1.99 | 1.99 | 1.99 | |||||||
0.88 | 1.99 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.13 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.25 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
NR,k [kN] | 0.4 | 0.68 | 0.94 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | ||||||
0.5 | 0.68 | 0.94 | 2.06 | 2.37 | 2.37 | 2.37 | 2.37 | |||||||
0.55 | 0.68 | 0.94 | 2.06 | 2.59 | 2.59 | 2.59 | 2.59 | |||||||
0.63 | 0.68 | 0.94 | 2.06 | 2.64 | 2.93 | 2.93 | 2.93 | |||||||
0.75 | 0.68 | 0.94 | 2.06 | 2.64 | 3.44 | 3.44 | 3.44 | |||||||
0.88 | 0.68 | 0.94 | 2.06 | 2.64 | 3.44 | 3.44 | 3.44 | |||||||
1 | 0.68 | 0.94 | 2.06 | 2.64 | 3.44 | 3.44 | 3.44 | |||||||
1.13 | 0.68 | 0.94 | 2.06 | 2.64 | 3.44 | 3.44 | 3.44 | |||||||
1.25 | 0.68 | 0.94 | 2.06 | 2.64 | 3.44 | 3.44 | 3.44 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
22 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | ||||||
0.5 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | |||||||
0.55 | 1.69 | 1.69 | 1.69 | 1.69 | 1.69 | 1.69 | 1.69 | |||||||
0.63 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | |||||||
0.75 | 1.99 | 1.99 | 1.99 | 1.99 | 1.99 | 1.99 | 1.99 | |||||||
0.88 | 1.99 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.13 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
1.25 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | 3.17 | |||||||
NR,k [kN] | 0.4 | 0.68 | 0.94 | 1.81 | 1.81 | 1.81 | 1.81 | 1.81 | ||||||
0.5 | 0.68 | 0.94 | 2.06 | 2.47 | 2.47 | 2.47 | 2.47 | |||||||
0.55 | 0.68 | 0.94 | 2.06 | 2.64 | 2.79 | 2.79 | 2.79 | |||||||
0.63 | 0.68 | 0.94 | 2.06 | 2.64 | 3.31 | 3.31 | 3.31 | |||||||
0.75 | 0.68 | 0.94 | 2.06 | 2.64 | 4.09 | 4.09 | 4.09 | |||||||
0.88 | 0.68 | 0.94 | 2.06 | 2.64 | 4.09 | 4.09 | 4.09 | |||||||
1 | 0.68 | 0.94 | 2.06 | 2.64 | 4.09 | 4.09 | 4.09 | |||||||
1.13 | 0.68 | 0.94 | 2.06 | 2.64 | 4.09 | 4.09 | 4.09 | |||||||
1.25 | 0.68 | 0.94 | 2.06 | 2.64 | 4.09 | 4.09 | 4.09 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
mm