Base
Application
Sandwich panels
SS A2 304
Steel ≤ 1,5 mm
Specifications
- Head style 5/16" (8 mm)
- Washer diameter standard 19 mm
- SS EPDM bond seal
- Support thread
- Thread for substructure steel ≤ 1,5 mm
- Drilling point 2 reduced
Options
- Powder coated in any desired RAL colour
- Washer diameter 16 or 22 mm
Certificates
Section
Applications
Using the table below, the correct length of the fastener can easily be determined.
Size | Minimal Insulation thickness | Article code | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.0 | 20.0 | 40.0 | 60.0 | 80.0 | 100.0 | 120.0 | 140.0 | 160.0 | 180.0 | 200.0 | 220.0 | 240.0 | ||
6,3/7,0 x 60 mm | 0 - 20 mm
|
1002026306019 | ||||||||||||
6,3/7,0 x 75 mm | 20 - 25 mm
|
1002026307519 | ||||||||||||
6,3/7,0 x 100 mm | 25 - 50 mm
|
1002026310019 | ||||||||||||
6,3/7,0 x 125 mm | 50 - 75 mm
|
1002026312519 | ||||||||||||
6,3/7,0 x 145 mm | 75 - 95 mm
|
1002026314519 | ||||||||||||
6,3/7,0 x 165 mm | 95 - 115 mm
|
1002026316519 | ||||||||||||
6,3/7,0 x 185 mm | 115 - 135 mm
|
1002026318519 | ||||||||||||
6,3/7,0 x 205 mm | 135 - 155 mm
|
1002026320519 | ||||||||||||
6,3/7,0 x 225 mm | 155 - 175 mm
|
1002026322519 | ||||||||||||
6,3/7,0 x 245 mm | 175 - 195 mm
|
1002026324519 | ||||||||||||
6,3/7,0 x 265 mm | 195 - 215 mm
|
1002026326519 | ||||||||||||
6,3/7,0 x 300 mm | 215 - 250 mm
|
1002026330019 |
Order information
Product | Size | Packaging | Article code |
---|---|---|---|
Sandwich Panel Screw 6,3/7,0 x 60 – DP2 | 60 mm | 100 pcs/box | 1002026306019 |
Sandwich Panel Screw 6,3/7,0 x 75 – DP2 | 75 mm | 100 pcs/box | 1002026307519 |
Sandwich Panel Screw 6,3/7,0 x 100 – DP2 | 100 mm | 100 pcs/box | 1002026310019 |
Sandwich Panel Screw 6,3/7,0 x 125 – DP2 | 125 mm | 100 pcs/box | 1002026312519 |
Sandwich Panel Screw 6,3/7,0 x 145 – DP2 | 145 mm | 100 pcs/box | 1002026314519 |
Sandwich Panel Screw 6,3/7,0 x 165 – DP2 | 165 mm | 100 pcs/box | 1002026316519 |
Sandwich Panel Screw 6,3/7,0 x 185 – DP2 | 185 mm | 100 pcs/box | 1002026318519 |
Sandwich Panel Screw 6,3/7,0 x 205 – DP2 | 205 mm | 100 pcs/box | 1002026320519 |
Sandwich Panel Screw 6,3/7,0 x 225 – DP2 | 225 mm | 100 pcs/box | 1002026322519 |
Sandwich Panel Screw 6,3/7,0 x 245 – DP2 | 245 mm | 100 pcs/box | 1002026324519 |
Sandwich Panel Screw 6,3/7,0 x 265 – DP2 | 265 mm | 100 pcs/box | 1002026326519 |
Sandwich Panel Screw 6,3/7,0 x 300 – DP2 | 300 mm | 100 pcs/box | 1002026330019 |
Mechanical properties
16 mm
19 mm
22 mm
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | SteelQuality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | SteelQuality S235 – conform 10025-2 and S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 1,5 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.5 | |||||||||
VR,k [kN] | 0.4 | 0.67 | 0.67 | 0.67 | 0.67 | 0.67 | 0.67 | |||||||
0.5 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | ||||||||
0.55 | 1.48 | 1.48 | 1.48 | 1.48 | 1.48 | 1.48 | ||||||||
0.63 | 1.76 | 1.76 | 1.76 | 1.76 | 1.76 | 1.76 | ||||||||
0.75 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | ||||||||
0.88 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | ||||||||
1 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | ||||||||
NR,k [kN] | 0.4 | 0.99 | 1.15 | 1.29 | 1.31 | 1.31 | 1.31 | |||||||
0.5 | 0.99 | 1.15 | 1.29 | 1.39 | 1.39 | 1.39 | ||||||||
0.55 | 0.99 | 1.15 | 1.29 | 1.5 | 1.64 | 1.64 | ||||||||
0.63 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.04 | ||||||||
0.75 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
0.88 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
1 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
u [mm] | 40 | 8 | 7.5 | 7 | 7 | 6.5 | 10 | |||||||
50 | 10 | 9 | 8.5 | 8.5 | 8 | 12.5 | ||||||||
60 | 12 | 11 | 10.5 | 10.5 | 9.5 | 15 | ||||||||
80 | 16 | 15 | 14 | 14 | 13 | 20 | ||||||||
100 | 20 | 18.5 | 17.5 | 17.5 | 16 | 25 | ||||||||
120 | 24 | 22.5 | 21 | 21 | 19.5 | 30 | ||||||||
140 | 28 | 26 | 24.5 | 24.5 | 22.5 | 35 | ||||||||
>160 | 32 | 30 | 28 | 28 | 26 | 40 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | SteelQuality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | SteelQuality S235 – conform 10025-2 and S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 1,5 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.5 | |||||||||
VR,k [kN] | 0.4 | 0.67 | 0.67 | 0.67 | 0.67 | 0.67 | 0.67 | |||||||
0.5 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | ||||||||
0.55 | 1.48 | 1.48 | 1.48 | 1.48 | 1.48 | 1.48 | ||||||||
0.63 | 1.76 | 1.76 | 1.76 | 1.76 | 1.76 | 1.76 | ||||||||
0.75 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | ||||||||
0.88 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | ||||||||
1 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | ||||||||
NR,k [kN] | 0.4 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 1.7 | |||||||
0.5 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 1.7 | ||||||||
0.55 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.03 | ||||||||
0.63 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
0.75 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
0.88 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
1 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
u [mm] | 40 | 8 | 7.5 | 7 | 7 | 6.5 | 10 | |||||||
50 | 10 | 9 | 8.5 | 8.5 | 8 | 12.5 | ||||||||
60 | 12 | 11 | 10.5 | 10.5 | 9.5 | 15 | ||||||||
80 | 16 | 15 | 14 | 14 | 13 | 20 | ||||||||
100 | 20 | 18.5 | 17.5 | 17.5 | 16 | 25 | ||||||||
120 | 24 | 22.5 | 21 | 21 | 19.5 | 30 | ||||||||
140 | 28 | 26 | 24.5 | 24.5 | 22.5 | 35 | ||||||||
>160 | 32 | 30 | 28 | 28 | 26 | 40 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | SteelQuality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | SteelQuality S235 – conform 10025-2 and S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 1,5 mm |
Washer diameter
22 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.5 | |||||||||
VR,k [kN] | 0.4 | 0.67 | 0.67 | 0.67 | 0.67 | 0.67 | 0.67 | |||||||
0.5 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | ||||||||
0.55 | 1.48 | 1.48 | 1.48 | 1.48 | 1.48 | 1.48 | ||||||||
0.63 | 1.76 | 1.76 | 1.76 | 1.76 | 1.76 | 1.76 | ||||||||
0.75 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | ||||||||
0.88 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | ||||||||
1 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | 2.17 | ||||||||
NR,k [kN] | 0.4 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 1.9 | |||||||
0.5 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.03 | ||||||||
0.55 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
0.63 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
0.75 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
0.88 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
1 | 0.99 | 1.15 | 1.29 | 1.5 | 1.69 | 2.08 | ||||||||
u [mm] | 40 | 8 | 7.5 | 7 | 7 | 6.5 | 10 | |||||||
50 | 10 | 9 | 8.5 | 8.5 | 8 | 12.5 | ||||||||
60 | 12 | 11 | 10.5 | 10.5 | 9.5 | 15 | ||||||||
80 | 16 | 15 | 14 | 14 | 13 | 20 | ||||||||
100 | 20 | 18.5 | 17.5 | 17.5 | 16 | 25 | ||||||||
120 | 24 | 22.5 | 21 | 21 | 19.5 | 30 | ||||||||
140 | 28 | 26 | 24.5 | 24.5 | 22.5 | 35 | ||||||||
>160 | 32 | 30 | 28 | 28 | 26 | 40 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | SteelQuality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | SteelQuality S235 – conform 10025-2 and S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 1,5 mm |
mm