Base
Application
Sandwich panels
SS A2 304
Steel
Specifications
- Head style 5/16” (8 mm)
- Washer diameter standard 16 mm
- SS EPDM bond seal
- Thread for substructure steel
- Drilling point type BZ
Options
- Powder coated in any desired RAL colour
- Washer diameter 19 of 22 mm
Certificates
Section
Applications
Using the table below, the correct length of the fastener can easily be determined.
Size | Minimal Insulation thickness | Article code | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
0.0 | 20.0 | 40.0 | 60.0 | 80.0 | 100.0 | 120.0 | 140.0 | 160.0 | ||
6,3 x 19 mm | 0 - 12 mm
|
3502076301916 | ||||||||
6,3 x 25 mm | 0 - 18 mm
|
3502076302516 | ||||||||
6,3 x 38 mm | 0 - 31 mm
|
3502076303816 | ||||||||
6,3 x 50 mm | 0 - 43 mm
|
3502076305016 | ||||||||
6,3 x 64 mm | 0 - 57 mm
|
3502076306416 | ||||||||
6,3 x 75 mm | 0 - 68 mm
|
3502076307516 | ||||||||
6,3 x 90 mm | 23 - 83 mm
|
3502076309016 | ||||||||
6,3 x 100 mm | 33 - 93 mm
|
3502076310016 | ||||||||
6,3 x 115 mm | 48 - 108 mm
|
3502076311516 | ||||||||
6,3 x 150 mm | 83 - 143 mm
|
3502076315016 | ||||||||
6,3 x 175 mm | 108 - 168 mm
|
3502076317516 |
Order information
Product | Size | Packaging | Article code |
---|---|---|---|
Drill Screw, type BZ, 5/16, 6,3 x 19 | 19 mm | 250 pcs/box | 3502076301916 |
Drill Screw, type BZ, 5/16, 6,3 x 25 | 25 mm | 200 pcs/box | 3502076302516 |
Drill Screw, type BZ, 5/16, 6,3 x 38 | 38 mm | 200 pcs/box | 3502076303816 |
Drill Screw, type BZ, 5/16, 6,3 x 50 | 50 mm | 200 pcs/box | 3502076305016 |
Drill Screw, type BZ, 5/16, 6,3 x 64 | 64 mm | 100 pcs/box | 3502076306416 |
Drill Screw, type BZ, 5/16, 6,3 x 75 | 75 mm | 100 pcs/box | 3502076307516 |
Drill Screw, type BZ, 5/16, 6,3 x 90 | 90 mm | 100 pcs/box | 3502076309016 |
Drill Screw, type BZ, 5/16, 6,3 x 100 | 100 mm | 100 pcs/box | 3502076310016 |
Drill Screw, type BZ, 5/16, 6,3 x 115 | 115 mm | 100 pcs/box | 3502076311516 |
Drill Screw, type BZ, 5/16, 6,3 x 150 | 150 mm | 100 pcs/box | 3502076315016 |
Drill Screw, type BZ, 5/16, 6,3 x 175 | 175 mm | 100 pcs/box | 3502076317516 |
Mechanical properties
16 mm
19 mm
Materials | ||
---|---|---|
Screw | Stainless steel (1.4301) - EN 10088 |
|
Bond washer | Stainless steel (1.4301) - EN 10088 | |
Material A (tl) | S280GD, S320GD or S350 GD - EN10346 | |
Material B (tll) | S235 - EN10025, S280GD, S320GD or S350 GD - EN10346 | |
Drilling capacity | Pre-drilled |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | ||||||||||
1.25 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | 7 | |||
VR,k [kN] | 0.5 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | |
0.55 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | ||
0.63 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | ||
0.75 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | ||
0.88 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | ||
1 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | ||
1.13 | 3.43 | 3.72 | 4.3 | 4.88 | 5.19 | 5.19 | 5.19 | 5.19 | 5.19 | ||
1.25 | 3.85 | 4.11 | 4.36 | 5.17 | 5.69 | 5.76 | 5.76 | 5.76 | 5.76 | ||
1.5 | 3.85 | 5.1 | 5.52 | 5.95 | 6.37 | 6.98 | 6.98 | 6.98 | 6.98 | ||
1.75 | 3.85 | 5.1 | 6.63 | 6.96 | 7.28 | 7.94 | 7.94 | 7.94 | 7.94 | ||
2 | 3.85 | 5.1 | 7.93 | 8.17 | 8.41 | 8.89 | 8.89 | 8.89 | 8.89 | ||
NR,k [kN] | 0.5 | 1.27 | 1.27 | 1.27 | 1.27 | 1.27 | 1.27 | 1.27 | 1.27 | 1.27 | |
0.55 | 1.28 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | ||
0.63 | 1.28 | 1.8 | 1.87 | 1.87 | 1.87 | 1.87 | 1.87 | 1.87 | 1.87 | ||
0.75 | 1.28 | 1.8 | 2.42 | 2.42 | 2.42 | 2.42 | 2.42 | 2.42 | 2.42 | ||
0.88 | 1.28 | 1.8 | 2.58 | 3.21 | 3.21 | 3.21 | 3.21 | 3.21 | 3.21 | ||
1 | 1.28 | 1.8 | 2.58 | 3.94 | 3.94 | 3.94 | 3.94 | 3.94 | 3.94 | ||
1.13 | 1.28 | 1.8 | 2.58 | 4.85 | 4.9 | 4.9 | 4.9 | 4.9 | 4.9 | ||
1.25 | 1.28 | 1.8 | 2.58 | 4.85 | 5.78 | 5.78 | 5.78 | 5.78 | 5.78 | ||
1.5 | 1.28 | 1.8 | 2.58 | 4.85 | 5.78 | 5.78 | 5.78 | 5.78 | 5.78 | ||
1.75 | 1.28 | 1.8 | 2.58 | 4.85 | 5.78 | 5.78 | 5.78 | 5.78 | 5.78 | ||
2 | 1.28 | 1.8 | 2.58 | 4.85 | 5.78 | 5.78 | 5.78 | 5.78 | 5.78 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Stainless steel (1.4301) - EN 10088 |
|
Bond washer | Stainless steel (1.4301) - EN 10088 | |
Material A (tl) | S280GD, S320GD or S350 GD - EN10346 | |
Material B (tll) | S235 - EN10025, S280GD, S320GD or S350 GD - EN10346 | |
Drilling capacity | Pre-drilled |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | ||||||||||
1.25 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | 7 | |||
VR,k [kN] | 0.5 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | |
0.55 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | 1.05 | ||
0.63 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | 1.31 | ||
0.75 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | ||
0.88 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | 2.23 | ||
1 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | ||
1.13 | 3.43 | 3.72 | 4.3 | 4.88 | 5.19 | 5.19 | 5.19 | 5.19 | 5.19 | ||
1.25 | 3.85 | 4.11 | 4.36 | 5.17 | 5.69 | 5.76 | 5.76 | 5.76 | 5.76 | ||
1.5 | 3.85 | 5.1 | 5.52 | 5.95 | 6.37 | 6.98 | 6.98 | 6.98 | 6.98 | ||
1.75 | 3.85 | 5.1 | 6.63 | 6.96 | 7.28 | 7.94 | 7.94 | 7.94 | 7.94 | ||
2 | 3.85 | 5.1 | 7.93 | 8.17 | 8.41 | 8.89 | 8.89 | 8.89 | 8.89 | ||
NR,k [kN] | 0.5 | 1.27 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | |
0.55 | 1.28 | 1.77 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | ||
0.63 | 1.28 | 1.8 | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | ||
0.75 | 1.28 | 1.8 | 2.42 | 2.85 | 2.85 | 2.85 | 2.85 | 2.85 | 2.85 | ||
0.88 | 1.28 | 1.8 | 2.58 | 3.43 | 3.43 | 3.43 | 3.43 | 3.43 | 3.43 | ||
1 | 1.28 | 1.8 | 2.58 | 3.72 | 3.97 | 3.97 | 3.97 | 3.97 | 3.97 | ||
1.13 | 1.28 | 1.8 | 2.58 | 3.72 | 4.85 | 4.92 | 4.92 | 4.92 | 4.92 | ||
1.25 | 1.28 | 1.8 | 2.58 | 3.72 | 4.85 | 5.8 | 5.8 | 5.8 | 5.8 | ||
1.5 | 1.28 | 1.8 | 2.58 | 3.72 | 4.85 | 5.8 | 5.8 | 5.8 | 5.8 | ||
1.75 | 1.28 | 1.8 | 2.58 | 3.72 | 4.85 | 5.8 | 5.8 | 5.8 | 5.8 | ||
2 | 1.28 | 1.8 | 2.58 | 3.72 | 4.85 | 5.8 | 5.8 | 5.8 | 5.8 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Stainless steel (1.4301) - EN 10088 |
|
Bond washer | Stainless steel (1.4301) - EN 10088 | |
Material A (tl) | S280GD, S320GD or S350 GD - EN10346 | |
Material B (tll) | S235 - EN10025, S280GD, S320GD or S350 GD - EN10346 | |
Drilling capacity | Pre-drilled |
mm
Materials | ||
---|---|---|
Screw | Stainless steel (1.4301) - EN 10088 |
|
Bond washer | Stainless steel (1.4301) - EN 10088 | |
Material A (tl) | S280GD, S320GD or S350 GD - EN10346 | |
Material B (tll) | S235 - EN10025, S280GD, S320GD or S350 GD - EN10346 | |
Drilling capacity | Pre-drilled |
mm