Base
Application
Profielplaten
Bi-metal A2 304
Steel 1,5 to 5 mm
Specifications
- Head style 5/16” (8 mm)
- Washer diameter standard 16 mm
- SS EPDM bond seal
- Thread for substructure steel from 1,5 to 5 mm
- Drilling point 3 (hardened steel)
Options
- Powder coated in any desired RAL colour
- Washer diameter 19 or 22 mm
Certificates
Section
Order information
Product | Size (L) | Packaging | Article code |
---|---|---|---|
Self-drilling screw 5,5 x 30 - DP3 | 30 mm | 250 pcs/box | 2003035503016 |
Mechanical properties
16 mm
19 mm
22 mm
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | Steel Quality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | Steel Quality S235, EN 10025-2, S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | ||||||
0.5 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 | |||||||
0.55 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | |||||||
0.63 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | |||||||
0.75 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | |||||||
0.88 | 1.66 | 1.92 | 1.92 | 1.92 | 1.92 | 1.92 | 1.92 | |||||||
1 | 1.66 | 2.16 | 2.86 | 3.55 | 3.55 | 3.55 | 3.55 | |||||||
1.13 | 1.66 | 2.16 | 2.86 | 3.55 | 3.55 | 3.55 | 3.55 | |||||||
1.25 | 1.66 | 2.16 | 2.86 | 3.55 | 3.55 | 3.55 | 3.55 | |||||||
NR,k [kN] | 0.4 | 0.6 | 0.66 | 1.22 | 1.22 | 1.22 | 1.22 | 1.22 | ||||||
0.5 | 0.6 | 0.66 | 1.76 | 1.76 | 1.76 | 1.76 | 1.76 | |||||||
0.55 | 0.6 | 0.66 | 1.77 | 2.1 | 2.1 | 2.1 | 2.1 | |||||||
0.63 | 0.6 | 0.66 | 1.77 | 2.65 | 2.65 | 2.65 | 2.65 | |||||||
0.75 | 0.6 | 0.66 | 1.77 | 2.87 | 3.48 | 3.48 | 3.48 | |||||||
0.88 | 0.6 | 0.66 | 1.77 | 2.87 | 3.48 | 3.48 | 3.48 | |||||||
1 | 0.6 | 0.66 | 1.77 | 2.87 | 3.48 | 3.48 | 3.48 | |||||||
1.13 | 0.6 | 0.66 | 1.77 | 2.87 | 3.48 | 3.48 | 3.48 | |||||||
1.25 | 0.6 | 0.66 | 1.77 | 2.87 | 3.48 | 3.48 | 3.48 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | Steel Quality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | Steel Quality S235, EN 10025-2, S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | ||||||
0.5 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 | |||||||
0.55 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | |||||||
0.63 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | |||||||
0.75 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | |||||||
0.88 | 1.66 | 1.92 | 1.92 | 1.92 | 1.92 | 1.92 | 1.92 | |||||||
1 | 1.66 | 2.16 | 2.86 | 3.55 | 3.55 | 3.55 | 3.55 | |||||||
1.13 | 1.66 | 2.16 | 2.86 | 3.55 | 3.55 | 3.55 | 3.55 | |||||||
1.25 | 1.66 | 2.16 | 2.86 | 3.55 | 3.55 | 3.55 | 3.55 | |||||||
NR,k [kN] | 0.4 | 0.6 | 0.66 | 1.77 | 1.78 | 1.78 | 1.78 | 1.78 | ||||||
0.5 | 0.6 | 0.66 | 1.77 | 1.97 | 1.97 | 1.97 | 1.97 | |||||||
0.55 | 0.6 | 0.66 | 1.77 | 2.34 | 2.34 | 2.34 | 2.34 | |||||||
0.63 | 0.6 | 0.66 | 1.77 | 2.87 | 2.93 | 2.93 | 2.93 | |||||||
0.75 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.82 | 3.82 | |||||||
0.88 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.82 | 3.82 | |||||||
1 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.82 | 3.82 | |||||||
1.13 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.82 | 3.82 | |||||||
1.25 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.82 | 3.82 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | Steel Quality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | Steel Quality S235, EN 10025-2, S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
22 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | 0.86 | ||||||
0.5 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 | |||||||
0.55 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | 1.03 | |||||||
0.63 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | |||||||
0.75 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | 1.66 | |||||||
0.88 | 1.66 | 1.92 | 1.92 | 1.92 | 1.92 | 1.92 | 1.92 | |||||||
1 | 1.66 | 2.16 | 2.86 | 3.55 | 3.55 | 3.55 | 3.55 | |||||||
1.13 | 1.66 | 2.16 | 2.86 | 3.55 | 3.55 | 3.55 | 3.55 | |||||||
1.25 | 1.66 | 2.16 | 2.86 | 3.55 | 3.55 | 3.55 | 3.55 | |||||||
NR,k [kN] | 0.4 | 0.6 | 0.66 | 1.77 | 1.91 | 1.91 | 1.91 | 1.91 | ||||||
0.5 | 0.6 | 0.66 | 1.77 | 1.97 | 1.97 | 1.97 | 1.97 | |||||||
0.55 | 0.6 | 0.66 | 1.77 | 2.34 | 2.34 | 2.34 | 2.34 | |||||||
0.63 | 0.6 | 0.66 | 1.77 | 2.87 | 2.94 | 2.94 | 2.94 | |||||||
0.75 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.84 | 3.84 | |||||||
0.88 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.84 | 3.84 | |||||||
1 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.84 | 3.84 | |||||||
1.13 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.84 | 3.84 | |||||||
1.25 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.84 | 3.84 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | Steel Quality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | Steel Quality S235, EN 10025-2, S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
mm