Base
Section
Order information
Product | Size (L) | Packaging | Article code |
---|---|---|---|
Self-drilling screw 5,5 x 30 - DP3 | 30 mm | 250 pcs/box | 2003035503016 |
Mechanical properties
16 mm
19 mm
22 mm
Materials | ||
---|---|---|
Screw | SS 1.4006 (SUS410) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | Aluminium Alloy EN 573 Rm,min ≥ 215 N/mm² | |
Drilling capacity | Alu 215 ≤ 5 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 0.88 | 0.88 | 0.88 | 0.88 | 0.88 | 0.88 | 0.88 | ||||||
0.5 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | |||||||
0.55 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | |||||||
0.63 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | |||||||
0.75 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | |||||||
0.88 | 1.28 | 1.46 | 1.46 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
1 | 1.28 | 1.63 | 1.63 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
1.13 | 1.28 | 1.63 | 1.68 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
1.25 | 1.28 | 1.63 | 1.68 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
NR,k [kN] | 0.4 | 0.23 | 0.37 | 0.81 | 1.35 | 1.48 | 1.48 | 1.48 | ||||||
0.5 | 0.23 | 0.37 | 0.81 | 1.35 | 1.78 | 1.78 | 1.78 | |||||||
0.55 | 0.23 | 0.37 | 0.81 | 1.35 | 2.01 | 2.01 | 2.01 | |||||||
0.63 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.39 | 2.39 | |||||||
0.75 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
0.88 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
1 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
1.13 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
1.25 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
- Op verzoek zijn de mechanische eigenschappen in combinatie met een aluminium Support in Rm ≥ 165 N/mm² eveneens verkrijgbaar. Neem contact op met onze binnendienst voor meer informatie.
Materials | ||
---|---|---|
Screw | SS 1.4006 (SUS410) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | Aluminium Alloy EN 573 Rm,min ≥ 215 N/mm² | |
Drilling capacity | Alu 215 ≤ 5 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 0.88 | 0.88 | 0.88 | 0.88 | 0.88 | 0.88 | 0.88 | ||||||
0.5 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | |||||||
0.55 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | |||||||
0.63 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | |||||||
0.75 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | |||||||
0.88 | 1.28 | 1.46 | 1.46 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
1 | 1.28 | 1.63 | 1.63 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
1.13 | 1.28 | 1.63 | 1.68 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
1.25 | 1.28 | 1.63 | 1.68 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
NR,k [kN] | 0.4 | 0.23 | 0.37 | 0.81 | 1.35 | 1.61 | 1.61 | 1.61 | ||||||
0.5 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.37 | 2.37 | |||||||
0.55 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.59 | 2.59 | |||||||
0.63 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
0.75 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
0.88 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
1 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
1.13 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
1.25 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
- Op verzoek zijn de mechanische eigenschappen in combinatie met een aluminium Support in Rm ≥ 165 N/mm² eveneens verkrijgbaar. Neem contact op met onze binnendienst voor meer informatie.
Materials | ||
---|---|---|
Screw | SS 1.4006 (SUS410) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | Aluminium Alloy EN 573 Rm,min ≥ 215 N/mm² | |
Drilling capacity | Alu 215 ≤ 5 mm |
Washer diameter
22 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 0.88 | 0.88 | 0.88 | 0.88 | 0.88 | 0.88 | 0.88 | ||||||
0.5 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | |||||||
0.55 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | |||||||
0.63 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | 1.12 | |||||||
0.75 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | 1.28 | |||||||
0.88 | 1.28 | 1.46 | 1.46 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
1 | 1.28 | 1.63 | 1.63 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
1.13 | 1.28 | 1.63 | 1.68 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
1.25 | 1.28 | 1.63 | 1.68 | 2.44 | 2.44 | 2.44 | 2.44 | |||||||
NR,k [kN] | 0.4 | 0.23 | 0.37 | 0.81 | 1.35 | 1.81 | 1.81 | 1.81 | ||||||
0.5 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.47 | 2.47 | |||||||
0.55 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
0.63 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
0.75 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
0.88 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
1 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
1.13 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 | |||||||
1.25 | 0.23 | 0.37 | 0.81 | 1.35 | 2.03 | 2.79 | 2.79 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor or γm = 1,33
- Op verzoek zijn de mechanische eigenschappen in combinatie met een aluminium Support in Rm ≥ 165 N/mm² eveneens verkrijgbaar. Neem contact op met onze binnendienst voor meer informatie.
Materials | ||
---|---|---|
Screw | SS 1.4006 (SUS410) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | Aluminium Alloy EN 573 Rm,min ≥ 215 N/mm² | |
Drilling capacity | Alu 215 ≤ 5 mm |
mm