Base
Application
Stitching
SS SUS410
steel ≤ 1,5 mm
Specifications
- Head style 8 mm
- Washer diameter standard 16 mm
- SS with EPDM bond seal
- Thread for substructure steel ≤ 1,5 mm
- Sharp drilling point
Options
- Powder coated in any desired colour
Certificates
Section
Order information
Product | Size | Packaging | Article code |
---|---|---|---|
Self-Drilling metal screw PRO 4,8 x L | 20 mm | 250 pcs/box | 2003004802016 |
screw position
Mechanical properties
1 mm
16 mm
19 mm
Materials | ||
---|---|---|
Screw | SS 1.4006 (SUS410) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 1,5 mm |
Washer diameter
1 mm
tN1 [mm] | tII [mm] | |||||||||
0.4 | 0.5 | 0.55 | 0.63 | 0.75 | 0.88 | 1.5 | ||||
VR,k [kN] | 0.4 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | 1.01 | ||
0.5 | 1.52 | 1.52 | 1.52 | 1.52 | 1.52 | 1.52 | 1.52 | |||
0.55 | 1.56 | 1.56 | 1.56 | 1.56 | 1.56 | 1.56 | 1.56 | |||
0.63 | 1.63 | 1.63 | 1.63 | 1.63 | 1.63 | 1.63 | 1.63 | |||
0.75 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | 1.73 | |||
0.88 | 1.73 | 2.71 | 2.71 | 2.71 | 2.71 | 2.71 | 2.71 | |||
1 | 1.73 | 2.71 | 2.71 | 2.71 | 2.71 | 2.71 | 2.71 | |||
1.13 | 1.73 | 2.71 | 2.71 | 2.71 | 2.71 | 2.71 | 2.71 | |||
1.25 | 1.73 | 2.71 | 2.71 | 2.71 | 2.71 | 2.71 | 2.71 | |||
NR,k [kN] | 0.4 | 0.49 | 0.82 | 0.91 | 1.15 | 1.22 | 1.29 | 1.29 | ||
0.5 | 0.49 | 0.82 | 0.91 | 1.15 | 1.22 | 1.98 | 1.98 | |||
0.55 | 0.49 | 0.82 | 0.91 | 1.15 | 1.22 | 2.09 | 2.09 | |||
0.63 | 0.49 | 0.82 | 0.91 | 1.15 | 1.22 | 2.09 | 2.09 | |||
0.75 | 0.49 | 0.82 | 0.91 | 1.15 | 1.22 | 2.09 | 2.09 | |||
0.88 | 0.49 | 0.82 | 0.91 | 1.15 | 1.22 | 2.09 | 2.09 | |||
1 | 0.49 | 0.82 | 0.91 | 1.15 | 1.22 | 2.09 | 2.09 | |||
1.13 | 0.49 | 0.82 | 0.91 | 1.15 | 1.22 | 2.09 | 2.09 | |||
1.25 | 0.49 | 0.82 | 0.91 | 1.15 | 1.22 | 2.09 | 2.09 |
- 1. Above mentioned values are characteristic values
- 2. To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | SS 1.4006 (SUS410) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 1,5 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||
0.4 | 0.5 | 0.55 | 0.6 | 0.63 | 0.75 | |||||
VR,k [kN] | 0.4 | 1.49 | 1.49 | 1.49 | 1.49 | 1.49 | 1.49 | |||
0.5 | 1.49 | 1.9 | 1.9 | 1.9 | 1.9 | 1.9 | ||||
0.55 | 1.49 | 1.9 | 2.07 | 2.07 | 2.07 | 2.07 | ||||
0.6 | 1.49 | 1.9 | 2.07 | 2.24 | 2.24 | 2.24 | ||||
0.63 | 1.49 | 1.9 | 2.07 | 2.24 | 2.35 | 2.35 | ||||
0.75 | 1.49 | 1.9 | 2.07 | 2.24 | 2.35 | 2.76 | ||||
NR,k [kN] | 0.4 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | |||
0.5 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | ||||
0.55 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | ||||
0.6 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | ||||
0.63 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | ||||
0.75 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 |
- 1. Above mentioned values are characteristic values
- 2. To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | SS 1.4006 (SUS410) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 1,5 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||
0.4 | 0.5 | 0.55 | 0.6 | 0.63 | 0.75 | |||||
VR,k [kN] | 0.4 | 1.49 | 1.49 | 1.49 | 1.49 | 1.49 | 1.49 | |||
0.5 | 1.49 | 1.9 | 1.9 | 1.9 | 1.9 | 1.9 | ||||
0.55 | 1.49 | 1.9 | 2.07 | 2.07 | 2.07 | 2.07 | ||||
0.6 | 1.49 | 1.9 | 2.07 | 2.24 | 2.24 | 2.24 | ||||
0.63 | 1.49 | 1.9 | 2.07 | 2.24 | 2.35 | 2.35 | ||||
0.75 | 1.49 | 1.9 | 2.07 | 2.24 | 2.35 | 2.76 | ||||
NR,k [kN] | 0.4 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | |||
0.5 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | ||||
0.55 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | ||||
0.6 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | ||||
0.63 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 | ||||
0.75 | 0.7 | 0.91 | 1.05 | 1.22 | 1.23 | 1.48 |
- 1. Above mentioned values are characteristic values
- 2. To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | SS 1.4006 (SUS410) - conform EN3506 |
|
Bond washer | SS 1.4301 (A2) - conform EN3506 | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 1,5 mm |
mm