Sandwich panel screw DP2
Home / Products / Sandwich panel screw DP2

Sandwich panel screw DP2

Steel ≤ 1,5 mm - Galvanised Article number: 10040263
  • Washer diameter:
    19 mm
    • 16 mm
    • 19 mm
    • 22 mm
  • Coating:

Base

Overview

Application

Sandwich panels Galvanised Steel ≤ 1,5 mm

Specifications

  1. Head style 5/16” (8 mm)
  2. Washer diameter standard 19 mm
  3. Galvanised EPDM bond seal
  4. Support thread
  5. Thread for substructure steel ≤ 1,5 mm
  6. Drilling point 2 reduced

Options

  1. Powder coated in any desired RAL colour
  2. Washer diameter 16 or 22 mm

Certificates

Section

2D 2D 2D

Applications

Using the table below, the correct length of the fastener can easily be determined.

Size Minimal Insulation thickness Article code
0.0 20.0 40.0 60.0 80.0 100.0 120.0 140.0 160.0 180.0 200.0 220.0 240.0
6,3/7,0 x 75 mm
0 - 25 mm
 1004026307519
6,3/7,0 x 100 mm
25 - 50 mm
 1004026310019
6,3/7,0 x 125 mm
50 - 75 mm
 1004026312519
6,3/7,0 x 145 mm
75 - 95 mm
 1004026314519
6,3/7,0 x 165 mm
95 - 115 mm
 1004026316519
6,3/7,0 x 185 mm
115 - 135 mm
 1004026318519
6,3/7,0 x 205 mm
135 - 155 mm
 1004026320519
6,3/7,0 x 225 mm
155 - 175 mm
 1004026322519
6,3/7,0 x 245 mm
175 - 195 mm
 1004026324519
6,3/7,0 x 265 mm
195 - 215 mm
 1004026326519
6,3/7,0 x 300 mm
215 - 250 mm
 1004026330019

Order information

ProductSize (L)PackagingArticle code
Sandwich Panel Screw 6,3/7,0 x 75 – DP275 mm100 pcs/box1004026307519
Sandwich Panel Screw 6,3/7,0 x 100 – DP2100 mm100 pcs/box1004026310019
Sandwich Panel Screw 6,3/7,0 x 125 – DP2125 mm100 pcs/box1004026312519
Sandwich Panel Screw 6,3/7,0 x 145 – DP2145 mm100 pcs/box1004026314519
Sandwich Panel Screw 6,3/7,0 x 165 – DP2165 mm100 pcs/box1004026316519
Sandwich Panel Screw 6,3/7,0 x 185 – DP2185 mm100 pcs/box1004026318519
Sandwich Panel Screw 6,3/7,0 x 205 – DP2205 mm100 pcs/box1004026320519
Sandwich Panel Screw 6,3/7,0 x 225 – DP2225 mm100 pcs/box1004026322519
Sandwich Panel Screw 6,3/7,0 x 245 – DP2245 mm100 pcs/box1004026324519
Sandwich Panel Screw 6,3/7,0 x 265 – DP2265 mm100 pcs/box1004026326519
Sandwich Panel Screw 6,3/7,0 x 300 – DP2300 mm100 pcs/box1004026330019

Mechanical properties

16 mm
19 mm
22 mm
W16
Materials
Screw Galvanised steel
Bond washerGalvanised steel
Material A (tl)S280GD, S320GD and S350GD conform EN 10346
Material B (tll)S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346
Drilling capacitySteel ≤ 1,5 mm
Washer diameter 16 mm
tN1 [mm] tII [mm]
0.4 0.5 0.55 0.63 0.75 0.88 1 1.13 1.25 1.5 2
VR,k [kN] 0.4 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48
0.5 1.48 2.32 2.32 2.32 2.32 2.32 2.32 2.32 2.32 2.32 2.32
0.55 1.48 2.32 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35
0.63 1.48 2.32 2.35 2.39 2.39 2.39 2.39 2.39 2.39 2.39 2.39
0.75 1.48 2.32 2.35 2.39 2.46 2.46 2.46 2.46 2.46 2.46 2.46
0.88 1.48 2.32 2.35 2.39 2.46 2.46 2.46 2.46 2.46 2.46 2.46
1 1.48 2.32 2.35 2.39 2.46 2.46 2.46 2.46 2.46 2.46 2.46
NR,k [kN] 0.4 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.33 1.33 1.33 1.33
0.5 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.55 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.63 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.75 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.88 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
1 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
u [mm] 40 - - - - 8 8 8 8 8 10 10
50 - - - - 10 10 10 10 10 12.5 12.5
60 - - - - 12 12 12 12 12 15 15
80 - - - - 16 16 16 16 16 20 20
100 - - - - 20 20 20 20 20 25 25
120 - - - - 24 24 24 24 24 30 30
≥160 - - - - 32 32 32 32 32 40 40
  • Above mentioned values are characteristic values
  • To determine the design value we advise to apply a material factor of γm = 1,33.
W19
Materials
Screw Galvanised steel
Bond washerGalvanised steel
Material A (tl)S280GD, S320GD and S350GD conform EN 10346
Material B (tll)S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346
Drilling capacitySteel ≤ 1,5 mm
Washer diameter 19 mm
tN1 [mm] tII [mm]
0.4 0.5 0.55 0.63 0.75 0.88 1 1.13 1.25 1.5 2
VR,k [kN] 0.4 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48
0.5 1.48 2.32 2.32 2.32 2.32 2.32 2.32 2.32 2.32 2.32 2.32
0.55 1.48 2.32 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35
0.63 1.48 2.32 2.35 2.39 2.39 2.39 2.39 2.39 2.39 2.39 2.39
0.75 1.48 2.32 2.35 2.39 2.46 2.46 2.46 2.46 2.46 2.46 2.46
0.88 1.48 2.32 2.35 2.39 2.46 2.46 2.46 2.46 2.46 2.46 2.46
1 1.48 2.32 2.35 2.39 2.46 2.46 2.46 2.46 2.46 2.46 2.46
NR,k [kN] 0.4 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.5 1.5 1.5
0.5 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.55 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.63 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.75 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.88 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
1 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
u [mm] 40 - - - - 8 8 8 8 8 10 10
50 - - - - 10 10 10 10 10 12.5 12.5
60 - - - - 12 12 12 12 12 15 15
80 - - - - 16 16 16 16 16 20 20
100 - - - - 20 20 20 20 20 25 25
120 - - - - 24 24 24 24 24 30 30
≥160 - - - - 32 32 32 32 32 40 40
  • Above mentioned values are characteristic values
  • To determine the design value we advise to apply a material factor of γm = 1,33.
W22
Materials
Screw Galvanised steel
Bond washerGalvanised steel
Material A (tl)S280GD, S320GD and S350GD conform EN 10346
Material B (tll)S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346
Drilling capacitySteel ≤ 1,5 mm
Washer diameter 22 mm
tN1 [mm] tII [mm]
0.4 0.5 0.55 0.63 0.75 0.88 1 1.13 1.25 1.5 2
VR,k [kN] 0.4 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48 1.48
0.5 1.48 2.32 2.32 2.32 2.32 2.32 2.32 2.32 2.32 2.32 2.32
0.55 1.48 2.32 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35 2.35
0.63 1.48 2.32 2.35 2.39 2.39 2.39 2.39 2.39 2.39 2.39 2.39
0.75 1.48 2.32 2.35 2.39 2.46 2.46 2.46 2.46 2.46 2.46 2.46
0.88 1.48 2.32 2.35 2.39 2.46 2.46 2.46 2.46 2.46 2.46 2.46
1 1.48 2.32 2.35 2.39 2.46 2.46 2.46 2.46 2.46 2.46 2.46
NR,k [kN] 0.4 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.71 1.71
0.5 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.55 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.63 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.75 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
0.88 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
1 0.42 0.74 0.76 0.78 0.83 1.13 1.28 1.45 1.61 1.97 1.97
u [mm] 40 - - - - 8 8 8 8 8 10 10
50 - - - - 10 10 10 10 10 12.5 12.5
60 - - - - 12 12 12 12 12 15 15
80 - - - - 16 16 16 16 16 20 20
100 - - - - 20 20 20 20 20 25 25
120 - - - - 24 24 24 24 24 30 30
≥160 - - - - 32 32 32 32 32 40 40
  • Above mentioned values are characteristic values
  • To determine the design value we advise to apply a material factor of γm = 1,33.
Materials
Screw Galvanised steel
Bond washerGalvanised steel
Material A (tl)S280GD, S320GD and S350GD conform EN 10346
Material B (tll)S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346
Drilling capacitySteel ≤ 1,5 mm
mm