Base
Application
Sandwich panels
Galvanised
Steel 5 to 10 mm
Specifications
- Head style 5/16” (8 mm)
- Washer diameter standard 19 mm
- Galvanised EPDM bond seal
- Support thread
- Thread for substructure steel 5 to 10 mm
- Drilling point 5 (hardened steel)
Options
- Powder coated in any desired RAL colour
- Washer diameter 16 of 22 mm
Certificates
Section
Applications
Using the table below, the correct length of the fastener can easily be determined.
Size | Minimal Insulation thickness | Article code | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
0.0 | 20.0 | 40.0 | 60.0 | 80.0 | 100.0 | 120.0 | 140.0 | 160.0 | ||
5,5/6,3 x75 mm | 0 - 40 mm
|
1004055507516 | ||||||||
5,5/6,3 x 100 mm | 40 - 63 mm
|
1004055510016 | ||||||||
5,5/6,3 x 135 mm | 63 - 98 mm
|
1004055513516 | ||||||||
5,5/6,3 x 150 mm | 98 - 113 mm
|
1004055515016 | ||||||||
5,5/6,3 x 170 mm | 113 - 133 mm
|
1004055517016 | ||||||||
5,5/6,3 x 190 mm | 133 - 153 mm
|
1004055519016 | ||||||||
5,5/6,3 x 210 mm | 153 - 173 mm
|
1004055521016 |
Order information
Product | Size | Packaging | Article code |
---|---|---|---|
Sandwich Panel Screw 5,5/6,3 x 75 – BP5 | 75 mm | 100 pcs/box | 1004055507516 |
Sandwich Panel Screw 5,5/6,3 x 100 – BP5 | 100 mm | 100 pcs/box | 1004055510016 |
Sandwich Panel Screw 5,5/6,3 x 135 – BP5 | 135 mm | 100 pcs/box | 1004055513516 |
Sandwich Panel Screw 5,5/6,3 x 150 – BP5 | 150 mm | 100 pcs/box | 1004055515016 |
Sandwich Panel Screw 5,5/6,3 x 170 – BP5 | 170 mm | 100 pcs/box | 1004055517016 |
Sandwich Panel Screw 5,5/6,3 x 190 – BP5 | 190 mm | 100 pcs/box | 1004055519016 |
Sandwich Panel Screw 5,5/6,3 x 210 – BP5 | 210 mm | 100 pcs/box | 1004055521016 |
Mechanical properties
16 mm
19 mm
22 mm
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 10 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.5 | 2 | 3 | 4 | 6 | |||||
VR,k [kN] | 0.4 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | |||
0.5 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | ||||
0.55 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | ||||
0.63 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | ||||
0.75 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | ||||
0.88 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
1 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
1.13 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
1.25 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
NR,k [kN] | 0.4 | 0.59 | 0.79 | 0.97 | 1.17 | 1.3 | 1.3 | 1.3 | 1.3 | 1.3 | 1.3 | |||
0.5 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.04 | 2.04 | 2.04 | 2.04 | ||||
0.55 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.19 | 2.19 | 2.19 | 2.19 | ||||
0.63 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.43 | 2.43 | 2.43 | 2.43 | ||||
0.75 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 2.78 | 2.78 | 2.78 | ||||
0.88 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.36 | 3.36 | 3.36 | ||||
1 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.36 | 3.36 | 3.36 | ||||
1.13 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.36 | 3.36 | 3.36 | ||||
1.25 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.36 | 3.36 | 3.36 | ||||
u [mm] | 40 | 10 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 3 | 3 | |||
50 | 12.5 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 3.5 | 3.5 | ||||
60 | 15 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 4.5 | 4.5 | ||||
80 | 20 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 6 | 6 | ||||
100 | 25 | 12.5 | 12.5 | 12.5 | 12.5 | 12.5 | 12.5 | 12.5 | 7.5 | 7.5 | ||||
120 | 30 | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 9 | 9 | ||||
≥160 | 40 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 12 | 12 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 10 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.5 | 2 | 3 | 4 | 6 | |||||
VR,k [kN] | 0.4 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | |||
0.5 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | ||||
0.55 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | ||||
0.63 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | ||||
0.75 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | ||||
0.88 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
1 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
1.13 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
1.25 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
NR,k [kN] | 0.4 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.63 | 1.63 | 1.63 | 1.63 | 1.63 | |||
0.5 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 2.83 | 2.83 | 2.83 | ||||
0.55 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 2.87 | 2.87 | 2.87 | ||||
0.63 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 2.94 | 2.94 | 2.94 | ||||
0.75 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.03 | 3.03 | 3.03 | ||||
0.88 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.61 | 3.61 | 3.61 | ||||
1 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.61 | 3.61 | 3.61 | ||||
1.13 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.61 | 3.61 | 3.61 | ||||
1.25 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.61 | 3.61 | 3.61 | ||||
u [mm] | 40 | 10 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 3 | 3 | |||
50 | 12.5 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 3.5 | 3.5 | ||||
60 | 15 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 4.5 | 4.5 | ||||
80 | 20 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 6 | 6 | ||||
100 | 25 | 12.5 | 12.5 | 12.5 | 12.5 | 12.5 | 12.5 | 12.5 | 7.5 | 7.5 | ||||
120 | 30 | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 9 | 9 | ||||
≥160 | 40 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 12 | 12 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 10 mm |
Washer diameter
22 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 0.88 | 1 | 1.13 | 1.25 | 1.5 | 2 | 3 | 4 | 6 | |||||
VR,k [kN] | 0.4 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | 1.55 | |||
0.5 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | 2.19 | ||||
0.55 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | 2.26 | ||||
0.63 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | ||||
0.75 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | 2.55 | ||||
0.88 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
1 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
1.13 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
1.25 | 2.55 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | 3.46 | ||||
NR,k [kN] | 0.4 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.05 | 2.05 | 2.05 | 2.05 | |||
0.5 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 2.83 | 2.83 | 2.83 | ||||
0.55 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.01 | 3.01 | 3.01 | ||||
0.63 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.3 | 3.3 | 3.3 | ||||
0.75 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 3.73 | 3.73 | 3.73 | ||||
0.88 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 4.39 | 4.39 | 4.39 | ||||
1 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 4.39 | 4.39 | 4.39 | ||||
1.13 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 4.39 | 4.39 | 4.39 | ||||
1.25 | 0.59 | 0.79 | 0.97 | 1.17 | 1.35 | 1.73 | 2.48 | 4.39 | 4.39 | 4.39 | ||||
u [mm] | 40 | 10 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 3 | 3 | |||
50 | 12.5 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 3.5 | 3.5 | ||||
60 | 15 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 4.5 | 4.5 | ||||
80 | 20 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 6 | 6 | ||||
100 | 25 | 12.5 | 12.5 | 12.5 | 12.5 | 12.5 | 12.5 | 12.5 | 7.5 | 7.5 | ||||
120 | 30 | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 9 | 9 | ||||
≥160 | 40 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 12 | 12 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Galvanised steel |
|
Bond washer | Galvanised steel | |
Material A (tl) | S280GD, S320GD and S350GD conform EN 10346 | |
Material B (tll) | S235 conform EN 10025-2, S280GD, S320GD and S350GD conform EN 10346 | |
Drilling capacity | Steel ≤ 10 mm |
mm